Tiger Spider
About Us
All news
18 June 2026

Main Roads Western Australia – Roll-Coupling Policy for RAV combinations

Main Roads Western Australia – Roll-Coupling Policy for RAV combinations
Main Roads Western Australia – Roll-Coupling Policy for RAV combinations

Roll-coupled drawbars offer a practical path to safer RAV operations in Western Australia.

Rollover, especially rear-trailer rollover, remains a persistent and growing issue across the WA RAV fleet. Statistics show that rollover is up to five-times more prevalent in non-roll-coupled road trains, compared to roll-coupled or PBS-approved vehicle combinations. In simulation, roll-coupling materially improved stability by reducing load transfer and cutting rearward amplification (whip-crack effect in an evasive manoeuvre) by around half. That is significant because rearward amplification is one of the key drivers of trailer instability when a driver needs to steer sharply or recover from avoiding a hazard on the road, or if the vehicle deviates onto the road shoulder.

The strongest safety-case for equipping roll-coupling devices were seen in the combinations that matter most to WA freight: A-triples, Short/pocket A-doubles, Truck-and-two-dogs, and BA-triples.

The webinar presented by Tiger Spider can be found here: https://youtu.be/nU-3cwrx4LI

Main Roads Western Australia – Roll-Coupling Policy for RAV combinations

Main Roads Heavy Vehicle Services are proposing:

  1. All trailers used in non-PBS RAV configurations built after 1 January 2028 will need to be fitted with the prescribed Roll-Coupling.
  2. Operators are encouraged to fit the Roll-Coupling to their RAV's, regardless of age, particularly those identified as high-risk combinations.
  3. Operators involved in multiple rollover events may be directed by Main Roads to fit the prescribed Roll-Coupling to their fleet, within a specified time frame to retain their WA Heavy Vehicle Accreditation.

Consultation and feedback is being sought until the 3 July 2026: https://www.mysaytransport.wa.gov.au/main-roads-roll-coupling-policy

Main Roads Western Australia – Roll-Coupling Policy for RAV combinations

In collaboration with Main Roads WA, Tiger Spider developed a roll-coupled drawbar and towbar design standard, as well as a prototype prescriptive design. The design standard requires that roll-coupling devices meet all existing tow-coupling requirements (e.g. ADR 62), as well as additional torsional static and fatigue moments and a maximum of 4° (±2°) of total roll lash.

Main Roads Western Australia – Roll-Coupling Policy for RAV combinations

The prescriptive design was developed to provide industry a cheaper open-source design and a starting point for further improvement and iteration. Hence, ease of manufacture, maintenance and use of standard parts and materials were key design priorities. It is expected that improvements to the design will be developed within the guidelines of the proposed geometric and strength requirements.

For operators, the practical message is that roll-coupling may offer better stability in the real-world events that often lead to incidents. For manufacturers and component suppliers, the opportunity is to develop a consistent, interoperable design that can be built, maintained, and inspected with confidence.

The next step is prototype testing, stakeholder engagement, and phased implementation so the final standard and implementation is both technically robust and workable for industry.


All news

More news

15 December 2025

Tiger Spider will deliver Safe Electric Trailers and Converter Dollies to improve heavy vehicle safety

Tiger Spider’s safe electric trailers and converter dollies will receive crucial funding from the National Heavy Vehicle Regulator’s (NHVR) Heavy Vehicle Safety Initiative (HVSI), supported by the Australian Government.

Read more

2 January 2025

Mass Concessions for Euro VI Vehicles: What You Need to Know

As of 1 November 2024, the Heavy Vehicle (Mass, Dimension, and Loading) National Regulation were amended to allow increased axle mass limits for heavy vehicles complying with Euro VI emissions standards (ADR 80/04). These changes are designed to facilitate the adoption of cleaner, more environmentally friendly vehicles while maintaining safe operational standards. We provide a detailed breakdown of the key changes and what they mean for operators.

Read more

1 January 2025

No more PBS permits? Not quite.

The National PBS Tier 1 Notice is a significant step forward.

I just advised a PBS owner operator they’re now allowed 91 tonnes on the L3A HML network in NSW - they’d been capped at 78 tonnes under permit.

The Class 2 Notice released on 27 October 2021 means that PBS combinations no longer require permits to operate at Tier 1 masses.

However, this doesn’t apply in the NHVR’s home state of Queensland and the conditions in participating states and territory vary dramatically.

As always, the devil is in the detail.

Read more
Tiger Spider

Original thinking, engineered for you.

(03) 9537-1027
Suite 105-106/181 St Kilda Road,
St Kilda VIC 3182
Software supportsupport@tigerspider.com
Other enquiriesengineering@tigerspider.com

Software

Spider PathHevi SpecHevi Spec AdvancedPricingHelp Documentation

Services

PBS Vehicle ApprovalAustralian Design Rules (ADR)

Company

About UsPrivacy

© 2026 Tiger Spider. All rights reserved.